Single-ply Membrane Adhesives

Share:
Single-ply membrane adhesives for commercial roofing.

Qualified labor availability is arguably our Industry’s most pressing challenge. Today, fast, efficient, economical waterproofing installations are an absolute necessity.

Each year billions of square feet of single-ply membranes are used to waterproof buildings with low-slope decks.  Adhered roof systems often outperform mechanically attached systems in terms of wind uplift performance.  Adhered systems also preserve the R-value of the roof insulation system by eliminating thermal bridging caused by mechanical fasteners and induction welding plates.  H.B. Fuller develops, manufactures, and packages a wide variety of solutions to adhere both bareback and fleeceback waterproofing membranes to a building’s roof system.


The Millennium PG-1 Pump Grade Adhesive adheres fleeceback membrane directly to roof deck,  insulation, or cover board with precision reliability and durability. The patented Millennium Cyclone 5/15** VS PLUS Pump Cart allows for adhesive dispense in a continuous bead or in a low pressure spray patter. The adhesive can be dispensed from either five-gallon or 15-gallon adhesive sets providing the contractor with superior economics, extremely fast installations, and significant labor saving.

H.B. Fuller also offers Millennium Sprayable Single-ply Bonding Adhesive (for EPDM and TPO), delivered via a convenient pressurized canister.  The adhesive is applied as a fast-drying contact adhesive that is approved for use in all VOC regulated markets.  The product makes installing membrane on vertical surfaces a breeze. Watch a video to learn more here.

 

With a full-line of traditional single-ply bonding adhesives available for use in both VOC and non-VOC regulated markets, H.B. Fuller has a product that will fit your exact requirements.

 

Contact us today for all of your membrane adhesive needs.

 

** US 9,573,150 B2; US 9,566,594 B2

Millennium Canister Flush Solution

  • Convenient method to clean and flush spray adhesive applicators
  • For use in non-VOC regulated markets
Technology Documentation
Millennium Canister Flush Solution
Used for flushing and cleaning adhesive applicators, hoses and accessories after applying solvent adhesive from a canister
Solvent-based | Solvent-based Nonreactive - Solvent and Solvent Blends

Millennium Cyclone 5/15 Low Pressure Pump Cart

  • Accommodates both 5 and 15 gallon 2-part adhesive sets
  • Easy tilt-up drum loading feature
  • Built-in Portable generator tray
Technology Documentation
Millennium Cyclone 5/15 Low Pressure Pump Cart
Used for dispensing two component 1:1 ratio low rise foam polyurethane adhesives in traditional bead application
Application Equipment | Equipment - Dispensing

Millennium Cyclone 5/15 VS Plus Pump Cart

  • Dual speed design for low pressure spray or ribbon application
  • Fast, economical fleeceback membrane installation
  • Easy tilt-up drum loading feature
Technology Documentation
Millennium Cyclone 5/15 VS Plus Pump Cart
Used for dispensing two component 1:1 ratio low rise foam polyurethane adhesives in a low pressure spray or traditional bead
Application Equipment | Equipment - Dispensing

Millennium Cyclone System Solution

  • Cleans and removes residual adhesive prior to long term storage
  • Keeps pumps, hoses and manifolds clean
Technology Documentation
Millennium Cyclone System Solution
Used for flushing residual adhesive from millennium cyclone pump carts, hoses and manifolds for general cleaning
Solvent Based Nonreactive - Solvent and Solvent Blends | Solvent-based | Solvent-based Nonreactive - Solvent and Solvent Blends

Millennium LVOC Canister Flush Solution

  • Convenient method to clean and flush spray adhesive applicators
  • Approved for use in VOC regulated markets
Technology Documentation
Millennium LVOC Canister Flush Solution
Used for flushing and cleaning adhesive applicators, hoses and accessories after applying solvent adhesive from a canister
Solvent-based | Solvent-based Nonreactive - Solvent and Solvent Blends

Millennium LVOC Single-Ply Bonding Adhesive

  • Low VOC content, approved for use in VOC regulated regions
  • Compatible with both TPO and EPDM membranes
  • Excellent spreadability
Technology Documentation
Millennium LVOC Single-Ply Bonding Adhesive
Used for installing epdm and tpo roofing membranes over insulation, cover board, or other acceptable substrates
Solvent-based | Solvent-based Nonreactive - Polychloroprene

Millennium One Step™ Battery Powered Applicator

  • Portable, no cords or hoses
  • Durable construction, capable of dispensing higher viscosity adhesives
  • Single piston drive assures on-ratio dispense
Technology Documentation
Millennium One Step™ Battery Powered Applicator
Used for 5l one steptm insulation and hurricane force® membrane adhesive cartridges dispensing 1
Application Equipment | Equipment - Dispensing

Millennium One Step™ Multi-Bead Applicator

  • Battery powered, no cords or hoses
  • Sets adhesive ribbons as prescriptive placement from 3"-12" on center
  • Durable machine with very low maintenance requirements
Technology Documentation
Millennium One Step™ Multi-Bead Applicator
Used for 5l one steptm and hurricane force® adhesives in multiple bead ribbons at prescriptive spacing 5l one steptm hurricane force® adhesives in multiple bead ribbons at prescriptive spacing dispensing 1
Application Equipment | Equipment - Dispensing

Millennium One Step™ Night Seal®

  • Unique weatherproof "skin" provides waterproof tie-ins within minutes
  • One StepTM technology makes it easy to apply
  • No temperature restrictions, suitable in all climates
Technology Documentation
Millennium One Step™ Night Seal®
Used for a reliable but temporary tie-in sealant between new roof covers and existing roof systems
2K Urethane | Liquid Reactive (Two Part) - 2K Polyurethane

Millennium One Step™ Pneumatic Applicator

  • Lightweight yet durable, high quality construction
  • Install a square of insulation in less than two minutes
Technology Documentation
Millennium One Step™ Pneumatic Applicator
Used for 5l one steptm insulation and hurricane force® membrane adhesive cartridges dispensing 1
Application Equipment | Equipment - Dispensing

Millennium PG-1 Pump Grade Adhesive - Fleeceback Membrane Adhesive

  • Minimizes penetrations, roof deck corrosion, and thermal bridging
  • Approved for use in VOC regulated markets
  • Suitable for use on all fleeceback single-ply membranes
Technology Documentation
Millennium PG-1 Pump Grade Adhesive - Fleeceback Membrane Adhesive
Used for bonding fleece backed single-ply membranes (epdm, tpo, & pvc) to roof deck, base sheets, or insulation boards
2K Urethane | Liquid Reactive (Two Part) - 2K Polyurethane

Millennium PVC / KEE Bonding Adhesive

  • Low VOC content, approved for use in all VOC regulated regions
  • Excellent spreadability
  • Usable at low temperatures, 25°F and rising
Technology Documentation
Millennium PVC / KEE Bonding Adhesive
Used for installing pvc and kee roofing membranes over insulation, cover board, or other acceptable substrates
Solvent-based | Solvent-based Nonreactive - Rubber, Other

Millennium Single-Ply Bonding Adhesive

  • Compatible with both TPO and EPDM membranes
  • Excellent spreadability and quick dry time
  • Not for use in VOC regulated markets
Technology Documentation
Millennium Single-Ply Bonding Adhesive
Used for installing epdm and tpo roofing membranes over insulation, cover board, or other acceptable substrates
Solvent-based | Solvent-based Nonreactive - Polychloroprene

Millennium Sprayable Single-Ply Bonding Adhesive

  • Tenacious bonding performance for both EPDM and TPO membranes
  • Can be applied at low temperature - 25°F and rising
  • VOC compliant in all markets
Technology Documentation
Millennium Sprayable Single-Ply Bonding Adhesive
Used for adhering fleeceback and standard epdm and tpo membranes to horizontal and vertical roof surfaces
Solvent-based | Solvent-based Nonreactive - Rubber, Other

Find your solution: