Powertrain

Share:
Vehicle going down a mountain road
Each year, more than 5 million automobile engines use H.B. Fuller powertrain adhesives and sealants. Our technical experts are here to help automotive designers and manufacturers select the optimal solution for their specific requirements - no matter how challenging. 

Powertrain flange sealants must provide excellent adhesion under a wide range of environmental conditions, including coming into regular contact with engine oil, freezing water or gear oil. Our state-of-the-art powertrain flange sealants perform well over the life of a vehicle.

Our Featured Powertrain Products

1280

  • 2K PU light weight foam provides for complete encapsulation of the battery cells within a module
  • This provides for excellent structural enhancements and increased impact resistance
Technology Documentation
1280
Used for battery module encapsulation 		PU | Reactive Chemistry

1510

  • Anaerobic flange sealant - good resistance to high temperature and chemicals
  • Used for sealing rigid flanges
Technology Documentation
1510
Used for rigid flange sealing 		Anaerobic | Anaerobic

1515

  • Anaerobic flange sealant - gneral purpose, can be used on vibriating joint surfaces
Technology Documentation
1515
Used for rigid flange sealing 		Anaerobic | Anaerobic

1518

  • Anaerobic flange sealant - suitable for aluminum alloy surfaces
Technology Documentation
1518
Used for rigid flange sealing 		Anaerobic | Anaerobic

1581

  • This is a single component RTV silicone suitable for sealing battery pack enclosures
Technology Documentation
1581
Used for battery pack main seal 		Silicone | Silicone RTV

1583

  • Excellent electrical properties, weather stability and chemical resistance
Technology Documentation
1583
Used for suitable for power battery pack sealing 		Silicones | Silicones

1590

  • General oxime silicone RTV for flange sealing on engines
  • High eleongation and excellent chemical resistance and aging
Technology Documentation
1590
Used for oil pan, ladder frame gaskets 		Silicone | Silicone RTV

1592

  • High remperature resistance RTV silicone sealant
Technology Documentation
1592
Used for high temperature sealing environoments 		Silicone | Silicone RTV

1596 Fa

  • Silicone RTV for with excellent compatibility with a variety of lubricating oils and coolant
Technology Documentation
1596 Fa
Used for engine front cover, waterpump 		Silicone | Silicone RTV

1596Fa

  • This is a single component RTV silicone suitable for general powertrain applications
  • This product has excellent resistance to gear oils, lubricating oils, and anti-freeze liquids
Technology Documentation
1596Fa
Used for general powertrain applications 		Silicone | Silicone RTV

1598

  • Silicone RTV flange sealant with excellent resistance to oils and variois chemicals
Technology Documentation
1598
Used for general flange sealing 		Silicone | Silicone RTV

1599

  • Silicone RTV suitable for sealing rigid joints
Technology Documentation
1599
Used for rigid flange sealing 		Silicone | Silicone RTV

1956

  • 1K PU structural adhesive for window bonding applications
  • Available in 2 viscosities
Technology Documentation
1956
Used for structural window bonding 		PU | PU

2061US

  • 2K fire retardent 2K PU
Technology Documentation
2061US
Used for general potting / encapsulation 		PU | PU

2532

  • Excellent conductivity insulation, flame retardancy, high temperature resistance
Technology Documentation
2532
Used for suitable for heat conduction potting of power battery module 		Silicones | Silicones

5005

  • Low odor and low blooimng wicking grade
Technology Documentation
5005
Used for medical, automotive and general assembly 		Instant Adhesives | Reactive Chemistry

5008

  • Low odor and low blooimng wicking grade
Technology Documentation
5008
Used for medical, automotive and general assembly 		Instant Adhesives | Reactive Chemistry

7012

  • 1K Acrylate plus activator is an excellent thermally conductive battery module cell bonding adhesive
  • Long open time but immediate fixture strength
Technology Documentation
7012
Used for battery cell to module base bonding 		Reactive Chemistry | Thermal Conductive Adhesive

AN06R

  • High strength,thixotropic viscosity, good fatigue resistance
Technology Documentation
AN06R
Used for suitable for fastener diameters under 20mm 		Anaerobic | Anaerobic

AR106

  • Thixotropic viscosity, high-strength sealant
Technology Documentation
AR106
Used for designed for sealing and securing cylindrical metal assemblies such as engine block up and cup plugs 		Anaerobic | Anaerobic

AS114

  • Soft adhesive layer after curing
Technology Documentation
AS114
Used for especially suitable for aluminum surface or joint surface with relative displacement caused by vibration, stress or temperature variation 		Anaerobic | Anaerobic

Cyberbond 2240

  • Rubber toughened CA provides for very fast bonding and increased impact resistance
Technology Documentation
Cyberbond 2240
Used for insulation bonding, general bonding 		CA | Cyanoacrylate

EM-9002

  • Something different
  • A different approach to Interior trim lamination
  • A Reactive Film
Technology Documentation
EM-9002
Used for interior trim laminations (intrument panels, door panels, central console ) 		Other | Reactive PU Film

EP832

  • High strength and good toughness, heat resistance up to 150℃ in long term and 180℃ in short time,low viscosity
Technology Documentation
EP832
Used for suitable for potting bonding and have a good bonding performance to metal, stone, wood, ceramic and most of plastics 		Epoxy | Epoxy

EP843

  • High strength, heat resistance can up to 150℃ in long term and 180℃ in short time,high viscosity
Technology Documentation
EP843
Used for suitable for mental and other parts bonding in high temperature and harsh conditions suitable for potting bonding, thixotropic, not flow on vertical surface 		Epoxy | Epoxy

EY1514AB

  • 2k Thermally Conductive Adhesive
Technology Documentation
EY1514AB
Used for general potting / encapsulation 		Epoxy | Epoxy

FH4003AB

  • General epoxy encapsulant
Technology Documentation
FH4003AB
Used for charger handle encapsulation, general potting 		Epoxy | Epoxy

FH8017M

  • Underfill and edge bonding material
Technology Documentation
FH8017M
Used for underfill / edge bonding, battery module 		Epoxy | Epoxy

Isarplast® 5109

  • Steering Wheels lamination specialist
Technology Documentation
Isarplast® 5109
Used for steering wheels manual lamination 		Solvent Rubber | Solvent-based

Isarplast® VP 509/51

  • Premium Primer for foils producers
Technology Documentation
Isarplast® VP 509/51
Used for primer for flexible foils producers 		Solven-based Primers | Solvent-based

MS1937

  • 1K modified silane adhesive and sealant provides for superior UV and ageing resistance
Technology Documentation
MS1937
Used for sealing windows and trim parts 		MS | STP

NP2075VF149

  • One-component
  • High performance and high green strength reactive hot melt, allowing for high speed and low WIP manufacturing processes
  • Excellent in-process thermal stability
  • Industry leading in-lamp heat resistance performance
Technology Documentation
NP2075VF149
Used for headlamp lens/housing bonding 		Reactive Chemistry | Reactive Hot Melt

PD 2128

  • Hi Tack acrylic PSA suitable for a variety of application including insulation, flexible ciruits, and general bonding
Technology Documentation
PD 2128
Used for insulation bonding, general bonding 		PSA | PSA

PIB6510

  • Excellent waterproof barrier properties,excellent UV resistance,permanent shape
Technology Documentation
PIB6510
Used for suitable for power battery pack sealing 		Other | Other

SN103W

  • De-alcohol type, low odor, non-yellowing
Technology Documentation
SN103W
Used for suitable for sealing and bonding electronic and electrical equipments 		Silicones | Silicones

SN106FA

  • Good resistance to gear oil, lubrication oil and anti-freezing solution
Technology Documentation
SN106FA
Used for apply to sealing joint surface parts of automobile transmissions, axles and engines with high rigidity 		Silicones | Silicones

SN106FA

  • Medium viscosity,low elongation, excellent gear oil resistance
Technology Documentation
SN106FA
Used for apply to rigid joint surface sealing of transmission and timing chain cover 		Silicones | Silicones

SN107

  • High elongation, good oil resistance and bonding performance
Technology Documentation
SN107
Used for apply to sealing joint surface of mechanical equipments 		Silicones | Silicones

SN595

  • Low strength, IP67,easy to operate
Technology Documentation
SN595
Used for suitable for power battery pack sealing 		Silicones | Silicones

swift®bond 2139/1 + swift®hardener 2111

  • Two-component
  • Good shelf life stability
  • Fogging resistance of greater than 130°C
  • Excellent bond strength at greater than 120°C
  • Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
  • Fast green strength
Technology Documentation
swift®bond 2139/1 + swift®hardener 2111
Used for headlamp lens/housing bonding 		PU | Reactive Chemistry

swift®bond 2140 + swift®hardener 2111

  • Two-component
  • Good shelf life stability
  • Fogging resistance of greater than 130°C
  • Excellent bond strength at greater than 120°C
  • Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
  • Slow green strength
Technology Documentation
swift®bond 2140 + swift®hardener 2111
Used for headlamp lens/housing bonding 		PU | Reactive Chemistry

Swift®Bond 2846

  • Best performance 1K solvent based solution for headliners and trunk lamination
Technology Documentation
Swift®Bond 2846
Used for headliners and trunk lamination 		PU | Reactive Chemistry

Swift®Bond 2U010

  • Two components Liquid Moisture curing for headliners construction
Technology Documentation
Swift®Bond 2U010
Used for headliners construction 		PU | Reactive Chemistry

Swift®Bond 3U012

  • One component Liquid Moisture curing for headliners construction
Technology Documentation
Swift®Bond 3U012
Used for headliners construction 		PU | Reactive Chemistry

Swift®bond 3U115

  • Meduim curing
  • Adhesion to all RV components
  • Extrusion grade
Technology Documentation
Swift®bond 3U115
Used for recreational vehicle - sidewall lamination 		LMC (Liquid Moisture Cure) | Reactive Chemistry

Swift®bond 3U117

  • Fast curing
  • Adhesion to all RV components
  • Extrusion grade
Technology Documentation
Swift®bond 3U117
Used for recreational vehicle - sidewall lamination 		LMC (Liquid Moisture Cure) | Reactive Chemistry

Swift®Col 214-X

  • Premium OEM's preferred solvent solution for manual lamination
Technology Documentation
Swift®Col 214-X
Used for interior trim laminations (intrument panels, door panels, central console ) 		2K PU | Solvent-based

Swift®Col 2411

  • High heat resistance 1K Neoprene suitable for bonding Untreated PP
Technology Documentation
Swift®Col 2411
Used for interior trim general laminations 		Solvent Rubber | Solvent-based

Swift®Col 2415

  • High heat resistance 1K Neoprene for BTR applications
Technology Documentation
Swift®Col 2415
Used for floors flat lamination for buses and trains 		Solvent Rubber | Solvent-based

Swift®Col 2418/1

  • High heat resistance 1K Neoprene for general purposes
Technology Documentation
Swift®Col 2418/1
Used for interior trim general laminations 		Solvent Rubber | Solvent-based

Swift®Col 2607-XX

  • Best performance Solvent Based PU with low emissions for any lamination
Technology Documentation
Swift®Col 2607-XX
Used for interior trim laminations (intrument panels, door panels, central console ) 		2K PU | Solvent-based

Swift®Col 4250

  • High perfomance with excellent procesability for general purpose
Technology Documentation
Swift®Col 4250
Used for soft parts laminations and foam repairments 		PSA | Solvent-based

Swift®Hardener 2003

  • Regular catalyst for LMC's
Technology Documentation
Swift®Hardener 2003
Used for catalyst for swift®bond solutions 		Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 2005

  • Special metalic catalyst with low emissions and high hidrolysis resistance
Technology Documentation
Swift®Hardener 2005
Used for catalyst for swift®bond solutions 		Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 2541

  • High curing speed solvent hardener
Technology Documentation
Swift®Hardener 2541
Used for hardener for any swift®col solutions 		Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 2551

  • High performance and high curing speed solvent hardener
Technology Documentation
Swift®Hardener 2551
Used for hardener for any swift®col solutions 		Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 9151

  • Long pot life solvent hardener
Technology Documentation
Swift®Hardener 9151
Used for hardener for any swift®col solutions 		Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 9515

  • Long pot life solvent hardener
Technology Documentation
Swift®Hardener 9515
Used for hardener for any swift®col solutions 		Catalyst & Thickeners | Reactive Chemistry

Swift®Lock 2003

  • Untreated PP bonding specialist for Interior Trim lamination
  • Low activation temperature and high green strength
Technology Documentation
Swift®Lock 2003
Used for interior trim laminations (intrument panels, door panels, central console ) 		Hot Melt | Reactive Hot Melt

Swift®Lock 2028

  • High green strength with short open time
  • The original
Technology Documentation
Swift®Lock 2028
Used for interior trim laminations (intrument panels, door panels, central console ) 		Hot Melt | Reactive Hot Melt

Swift®Lock 2028/1

  • Low activation and high green strength
  • Specialist in Interior Laminations
Technology Documentation
Swift®Lock 2028/1
Used for interior trim laminations (intrument panels, door panels, central console ) 		Hot Melt | Reactive Hot Melt

Swift®Lock 2681

  • High performance PUR
  • The PVC specialist for Interior Trim lamination
Technology Documentation
Swift®Lock 2681
Used for interior trim laminations (intrument panels, door panels, central console ) 		Hot Melt | Reactive Hot Melt

Swift®Lock 2682

  • Premium/Manual lamination specialist
  • Fast curing, low activation and color changing when heat activated
Technology Documentation
Swift®Lock 2682
Used for interior trim laminations (intrument panels, door panels, central console ) 		Hot Melt | Reactive Hot Melt

Swift®Lock 2900

  • Hybrid HMMC able to bond Polar and Non Polars without surface pre-treatment
Technology Documentation
Swift®Lock 2900
Used for interior trim laminations (intrument panels, door panels, central console ) 		Hot Melt | Reactive Hot Melt

Swift®Lock 2914

  • High green strength and wide adhesive spectrum for attachments and assemby processes
Technology Documentation
Swift®Lock 2914
Used for attachment and assembly reactive polyurethane 		Hot Melt | Reactive Hot Melt

Swift®Lock 2U464

  • Very aggressive hot tack with high green strength
Technology Documentation
Swift®Lock 2U464
Used for interior trim laminations (intrument panels, door panels, central console ) 		Hot Melt | Reactive Hot Melt

Swift®lock 2U520

  • Formualted to bond lauan to FRP
  • Reduces seam print
  • Excellent creep resitiance in summer
Technology Documentation
Swift®lock 2U520
Used for recreational vehicle - sidewall lamination 		Reactive Chemistry | Reactive Hot Melt

Swift®lock 2U566

  • Formualted to bond lauan to FRP
  • Medium open time
  • Pigment blue for production visability
Technology Documentation
Swift®lock 2U566
Used for recreational vehicle - sidewall lamination 		Reactive Chemistry | Reactive Hot Melt

Swift®lock 9053

  • High green strength for hard to bond FRP
  • Resists edge lift
  • Five or six layer composite wall builds
Technology Documentation
Swift®lock 9053
Used for recreational vehicle - sidewall lamination 		Reactive Chemistry | Reactive Hot Melt

Swift®Lock HL 9647

  • Reactive Olefine with excellent performance for assembly UPP parts
Technology Documentation
Swift®Lock HL 9647
Used for attachment and assembly reactive olefine 		Hot Melt | Reactive Hot Melt

Swift®Melt HM-1487

  • Trunk/carpet lamination PSA with good hot tack, very good shear strength, and high heat resistance
Technology Documentation
Swift®Melt HM-1487
Used for trunk, carpets and nvh parts lamination 		Hot Melt | PSA

Swift®tak 49404

  • Formulated to seal wall asssemblies
  • Paint roller application
Technology Documentation
Swift®tak 49404
Used for recreational vehicle - composite wall edge seal 		Water-based | Water-based

Swift®Tak L 52/012

  • 2K solution
  • Drying is not needed
  • Excellent performance for bonding Untreated PP
Technology Documentation
Swift®Tak L 12/052
Used for trunk lamination 		PSA | Water-based

Swift®Therm 2003

  • High Heat resistance APAO suitable for pre-applications
Technology Documentation
Swift®Therm 2003
Used for trunk lamination and attachments and assembly processes 		Hot Melt | Thermoplastic

Swift®Therm 2103

  • Long open time and high heat resistance APAO suitable for "on line" processes
Technology Documentation
Swift®Therm 2103
Used for ) and trunk lamination interior trim laminations (door panels, central console 		Hot Melt | Thermoplastic

Swift®Therm 2699

  • Hybrid APAO hot melt with superb heat resistance bonding Polar and Non Polars
  • Suitable for pre-applications
Technology Documentation
Swift®Therm 2699
Used for ) and trunk lamination interior trim laminations (door panels, central console 		Hot Melt | Thermoplastic

Swift®therm 2H740

  • Spray grade
  • Web-over application
  • Fast set and flexible
Technology Documentation
Swift®therm 2H740
Used for recreational vehicle - assembly backer 		Hot Melt

Swift®Therm HL 6612

  • High performance Polyamide with short open time for making attachments
Technology Documentation
Swift®Therm HL 6612
Used for attachment and assembly polyamide 		Hot Melt | Thermoplastic

Thermonex® 063-XX (series)

  • Market Reference
  • Gold Solution
  • Best processability with highest performance
Technology Documentation
Thermonex® 063-XX (series)
Used for interior trim laminations (intrument panels, door panels, central console ) 		Polyurethane Dispersions | Water-based

Thermonex® 080-XX (series)

  • Especially designed solution for Flocking applications
Technology Documentation
Thermonex® 080-XX (series)
Used for flocking applications 		Polyurethane Dispersions | Water-based

Thermonex® 115-02

  • A cost effective solution with a great performance
  • Silver Solution
Technology Documentation
Thermonex® 115-02
Used for interior trim laminations (intrument panels, door panels, central console ) 		Polyurethane Dispersions | Water-based

Thermonex® 3428-XX (series)

  • Especially designed solution for Headliners lamination processes
Technology Documentation
Thermonex® 3428-XX (series)
Used for interior trim lamination of headliners 		Polyurethane Dispersions | Water-based

Thermonex® 3820-XX (series)

  • The specialist for the ABS-PVC combination
  • Gold Solution
Technology Documentation
Thermonex® 3820-XX (series)
Used for interior trim laminations (intrument panels, door panels, central console ) 		Polyurethane Dispersions | Water-based

Thermonex® Hardener 004

  • Water based reliable hardener
Technology Documentation
Thermonex® Hardener 004
Used for hardener for any thermonex® solutions 		Catalyst & Thickeners | Reactive Chemistry

Thermonex® Hardener 006

  • Water based reliable hardener
Technology Documentation
Thermonex® Hardener 006
Used for hardener for any thermonex® solutions 		Catalyst & Thickeners | Reactive Chemistry

Thermonex® Hardener 007

  • High curing speed water based hardener
Technology Documentation
Thermonex® Hardener 007
Used for hardener for any thermonex® solutions 		Catalyst & Thickeners | Reactive Chemistry

TL 0587

  • 2K PU potting material with good flexibility
Technology Documentation
TL 0587
Used for general potting / encapsulation 		PU | PU

TS820

  • Low odor 2K Acrylate adhesive suitable for general bonding with excellent impact resistance
  • Suitable for cell bonding within batteyr modules
Technology Documentation
TS820
Used for general bonding, battery cell to module base 		MMA | Reactive Chemistry

TS820FR

  • Flame retardant, low odor, excellent shear and peel strength
Technology Documentation
TS820FR
Used for suitable for metals and ceramics bonding quickly with minimal surface preparation 		Anaerobic | Anaerobic

TS820L

  • Low odor structural, excellent shear and peel strength
Technology Documentation
TS820L
Used for suitable for metals and ceramics bonding quickly with minimal surface preparation 		Anaerobic | Anaerobic

TS956

  • 2 Part PU suitable for bonding dis-similar materials including plastics, as ecountered in plastic liftgates and a variety of exterior trim applications
Technology Documentation
TS956
Used for structural bonding of dis similar materials 		PU | PU

U340

  • High Speed
  • High Strength
  • Great on multiple surfaces
Technology Documentation
U340
Used for automotive, electronics and general assembly 		Reactive Chemistry | UV Cure Structurals

U345

  • High Strenth
  • Hgh flexibility
  • Good on multiple surfaces
Technology Documentation
U345
Used for automotive, electronics and general assembly 		Reactive Chemistry | UV Cure Structurals

WC2309

  • 1K Heat cure epoxy provides superior bonding of aluminum body structures
Technology Documentation
WC2309
Used for structural bonding of aluminum 		Epoxy | Epoxy

Contact a Specialist

We're here when you need us, every step of the way.

Contact Us Find a Location
H.B. Fuller - Connecting what matters.
More in:
Related posts from the

GlueTalk Blog

Augmenting the Automotive Aftermarket

Read More

Wetting Envelope as a Tool for Maximizing Bond Strength

Read More

HB Fuller Solutions to the Changing Automotive Lighting Industry

Read More

Worldwide Supplier of Adhesives in the Automotive Industry

Read More

Lightweighting Solutions for Automobiles

Read More

Icon - H.B. Fuller

Related
Brands

Find your solution:

Contact Us

Connect with Us

H.B. Fuller Company