With over 25 years in the market, TONSAN® adhesives have provided innovative engineering adhesive products and system solutions to help customers optimize processes, enhance product performance and production efficiency, reduce cost and prolong the service life of their equipment. TONSAN products provide high-value, fast-growing engineering adhesives for our customers in China and around the world with state-of-the-art manufacturing facilities, and strong product and technology development capabilities.
With a focus on innovation and growth, we partner with our customers to offer TONSAN adhesives to the Electronics, Transportation, Aerospace, New Energy, and Industrial Assembly, Maintenance and Repair markets. TONSAN products include silicones, polyurethanes, epoxies, acrylics, chloroprenes, butyl sealants, and tapes to this wide variety of market sectors.
Our TONSAN Products
| Technology | Documentation | |
|---|---|---|
1521Used for protection for diode and electronics |
TechnologyReactive Chemistry | Two Part Rapid Cure Silicone |
|
1522Used for attaching junction boxes and sealing frames waterproofing the module |
TechnologyReactive Chemistry | Two Part Rapid Cure Silicone |
|
1523Used for 1k silicon material, suitable for backrail bonding of double glasses pv module |
TechnologySilicons | Silicons |
|
1527Used for attaching junction boxes and sealing frames joint frame sealing to pv modules waterproofing the module |
TechnologyOne Part Silicone RTV | Reactive Chemistry | Silicons | Silicons |
|
1533Used for protection for diode and electronics |
TechnologyReactive Chemistry | Two Part Rapid Cure Silicone |
|
1581Used for attaching junction boxes and sealing frames waterproofing the module |
TechnologyOne Part Silicone RTV | Reactive Chemistry |
|
1583Used for suitable for power battery pack sealing |
TechnologySilicones | Silicones |
|
1586Used for attaching junction boxes and sealing frames waterproofing the module |
TechnologyOne Part Silicone RTV | Reactive Chemistry |
|
1956Used for structural window bonding wind shield and side window bonding, aluminum skin bonding |
Technology1K PU | PU | PU | Reactive Chemistry |
|
2532Used for suitable for heat conduction potting of power battery module |
TechnologySilicones | Silicones |
|
2533WUsed for thermally conductive 2 part silicone gel |
TechnologySilicone | Silicone Gel |
|
3211Used for apply to diamond wire cutting process temporary bonding of glass/resin and substrate temporary bonding of ingot and glass/resin |
TechnologyAnaerobic | Anaerobic chemistry | One component |
|
6510Used for a low lamination temperature material,suitable for edge sealing of double glasses pv module |
TechnologyPIB | PIB |
|
6520Used for ahigh lamination temperature material, suitable for edge sealing of double glasses pv module |
TechnologyPIB | PIB |
|
AN06RUsed for suitable for fastener diameters under 20mm |
TechnologyAnaerobic | Anaerobic |
|
AR106Used for designed for sealing and securing cylindrical metal assemblies such as engine block up and cup plugs |
TechnologyAnaerobic | Anaerobic |
|
AS114Used for especially suitable for aluminum surface or joint surface with relative displacement caused by vibration, stress or temperature variation |
TechnologyAnaerobic | Anaerobic |
|
EP832Used for suitable for potting bonding and have a good bonding performance to metal, stone, wood, ceramic and most of plastics |
TechnologyEpoxy | Epoxy |
|
EP843Used for suitable for mental and other parts bonding in high temperature and harsh conditions suitable for potting bonding, thixotropic, not flow on vertical surface |
TechnologyEpoxy | Epoxy |
|
MS107Used for both interior and exterior applications elastic sealing where high strength is required |
TechnologyModified Silane | Reactive Chemistry |
|
MS1937Used for preventing water permeation during residential and utility pv roof installation, non-corrosive |
TechnologyMS | MS |
|
PIB6510Used for suitable for power battery pack sealing |
TechnologyOther | Other |
|
SN103WUsed for suitable for sealing and bonding electronic and electrical equipments |
TechnologySilicones | Silicones |
|
SN106FAUsed for apply to sealing joint surface parts of automobile transmissions, axles and engines with high rigidity |
TechnologySilicones | Silicones |
|
SN107Used for apply to sealing joint surface of mechanical equipments |
TechnologySilicones | Silicones |
|
SN595Used for suitable for power battery pack sealing |
TechnologySilicones | Silicones |
|
STP 1921Used for car body, air conditioner sealing |
TechnologyReactive Chemistry |
|
TS820Used for general bonding, battery cell to module base general mma adheive for high strength bonding structural bonding a wide range similar and dissimilar substrates including engineered plastics, metals, and composites |
TechnologyAcrylate | MMA | MMA | Reactive Chemistry |
|
TS820FRUsed for bonding nickel to aluminum suitable for metals and ceramics bonding quickly with minimal surface preparation |
TechnologyAnaerobic | Anaerobic | MMA | Thermal adhesive |
|
TS820LUsed for suitable for metals and ceramics bonding quickly with minimal surface preparation |
TechnologyAnaerobic | Anaerobic |
|
TS850Used for bonding smc parts such bumper, high roof ,door panel and other parts |
Technology2K PU | Reactive Chemistry |
Related
Resources
Related
Technologies
- One-coat PU bonding agent
- One-coat rubber bonding agent
- Primer
- PU bonding agent additive
- Solvent-based
Contact a Specialist
We're here when you need us, every step of the way.
