Water Shield Adhesives and Weatherstrip Sealants

Share:

Keep water and dirt out of
the vehicle with our specially
designed adhesives and sealants

At H.B. Fuller, we create door water shield adhesives that are designed to last the life of the vehicle.  

The water shield helps prevent water and dirt from getting inside the interior of the vehicle through access panels in the doors. Water shields are typically made from polyethylene flexible plastic sheets held in place with an adhesive. The door water shield adhesive is applied around the perimeter of the water shield and seals against water intrusion between the water shield and the door shell.   

The Details

The adhesive material is designed to remain permanently flexible in all environmental conditions. It must stay adhered when a door is closed during the cold winter months, remain in place when battling the summer heat, and refrain from emitting any materials that would fog surfaces of the vehicle.

The adhesive is designed to be soft enough that the operator can easily press it into place, yet also be repositioned during assembly in case of misalignment. Door water shields are typically stacked when transported to the OEM and the adhesive will not deform during shipping.

Weatherstrip Sealants

Weatherstrips are installed around sealing surfaces like car doors, trunk lids, and sunroofs, to help keep water, wind, and dirt out of the vehicle. Our sealant keeps elements from getting under the weatherstrip in addition to helping protect the flanges they are attached to from rusting.
 
Our weatherstrip sealants are also designed to last the life of the vehicle, as they must remain permanently pliable in all environmental conditions and cannot cause staining to the painted surface. The material is designed so that it does not hinder the installation of the weatherstrip itself.
 
Talk to an H.B. Fuller expert today about your door water shield adhesive and vehicle weatherstrip sealant needs.

1280

  • 2K PU light weight foam provides for complete encapsulation of the battery cells within a module
  • This provides for excellent structural enhancements and increased impact resistance

1510

  • Anaerobic flange sealant - good resistance to high temperature and chemicals
  • Used for sealing rigid flanges

1515

  • Anaerobic flange sealant - gneral purpose, can be used on vibriating joint surfaces

1518

  • Anaerobic flange sealant - suitable for aluminum alloy surfaces

1581

  • This is a single component RTV silicone suitable for sealing battery pack enclosures

1583

  • Excellent electrical properties, weather stability and chemical resistance

1590

  • General oxime silicone RTV for flange sealing on engines
  • High eleongation and excellent chemical resistance and aging

1592

  • High remperature resistance RTV silicone sealant

1596 Fa

  • Silicone RTV for with excellent compatibility with a variety of lubricating oils and coolant

1596Fa

  • This is a single component RTV silicone suitable for general powertrain applications
  • This product has excellent resistance to gear oils, lubricating oils, and anti-freeze liquids

1598

  • Silicone RTV flange sealant with excellent resistance to oils and variois chemicals

1599

  • Silicone RTV suitable for sealing rigid joints

1956

  • 1K PU structural adhesive for window bonding applications
  • Available in 2 viscosities

2061US

  • 2K fire retardent 2K PU

2532

  • Excellent conductivity insulation, flame retardancy, high temperature resistance

5005

  • Low odor and low blooimng wicking grade

5008

  • Low odor and low blooimng wicking grade

7012

  • 1K Acrylate plus activator is an excellent thermally conductive battery module cell bonding adhesive
  • Long open time but immediate fixture strength

AN06R

  • High strength,thixotropic viscosity, good fatigue resistance

AR106

  • Thixotropic viscosity, high-strength sealant

AS114

  • Soft adhesive layer after curing

CILBOND 12E

  • High-temperature resistance primer
  • Excellent corrosion resistance and substrate protection
  • Used with CILBOND 80ET
Technology Documentation
CILBOND 12E
Used for high-temperature and aggressive environments
Primer | Solvent-based

CILBOND 24

  • Premier one-coat rubber-to-metal bonding agent
  • Bonds general purpose elastomers
  • Extremely versatile
Technology Documentation
CILBOND 24
Used for bonding general purpose elastomers: nr,sbr,ir,cr,br,eco,aem, vamac,csm, acsm, acm,xnbr,evm
One-coat rubber bonding agent | Solvent-based

CILBOND 36

  • Specialty one-coat rubber-to-metal bonding agent
  • Extreme corrosion protection
  • Long open time
Technology Documentation
CILBOND 36
Used for bonding specialty elastomers: silicone,fkm,fvmq,vmq,ffkm,hnbr,acm,aem
One-coat rubber bonding agent | Solvent-based

CILBOND 48

  • Low-temperature one-coat PU-to-metal bonding agent
  • Outstanding for room-temperature bonding
  • Clear in color
Technology Documentation
CILBOND 48
Used for bonding low-temperature cast pu, tpu, and millable pu
One-coat PU bonding agent | Solvent-based

CILBOND 49SF

  • High-temperature one-coat PU-to-metal bonding agent
  • Perfect for hot-cast PU bonding
  • Red in color
Technology Documentation
CILBOND 49SF
Used for bonding hot-cast pu, tpu, and millable pu
One-coat PU bonding agent | Solvent-based

CILBOND 62W

  • High-temperature resistance - 500 degree C
  • 100 percent friction material retention
  • Also bonds nitrile rubber
Technology Documentation
CILBOND 62W
Used for bonding brake pad media-to-back plate
One-coat friction bonding agent | Water-based

CILBOND 80ET

  • Exceptional topcoat rubber-to-metal bonding agent
  • Bonds all general purpose elastomers
  • Extremely versatile
Technology Documentation
CILBOND 80ET
Used for bonding all general purpose elastomers: nr,sbr,ir,cr,br,eco,aem, vamac,csm, acsm, acm,nbr,hnbr,xnbr,evm,eva,epdm,epm,cpe,millable pu
Rubber bonding agent topcoat | Solvent-based

CILBOND Diluent 4000

  • Acceptional Solvent Blend Designed for CILBOND Materials
  • Heavily used with CILBOND 48 and CILBOND 49SF
Technology Documentation
CILBOND Diluent 4000
Used for diluting cilbond 48 and cilbond 49sf
Diluent | Solvent-based

CILCURE B

  • Enhancement Aduct for CILBOND 48 and CILBOND 49SF
  • Increases bond performance
  • Improves heat resistance
  • Expands process window
Technology Documentation
CILCURE B
Used for enhancing heat and environmental performance of cilbond 48 and cilbond 49sf
PU bonding agent additive | Solvent-based

Cyberbond 2240

  • Rubber toughened CA provides for very fast bonding and increased impact resistance
Technology Documentation
Cyberbond 2240

EM-9002

  • Something different
  • A different approach to Interior trim lamination
  • A Reactive Film

EP832

  • High strength and good toughness, heat resistance up to 150℃ in long term and 180℃ in short time,low viscosity

EP843

  • High strength, heat resistance can up to 150℃ in long term and 180℃ in short time,high viscosity

EY1514AB

  • 2k Thermally Conductive Adhesive
Technology Documentation
EY1514AB

FH4003AB

  • General epoxy encapsulant
Technology Documentation
FH4003AB

FH8017M

  • Underfill and edge bonding material

Isarplast® 5109

  • Steering Wheels lamination specialist
Technology Documentation
Isarplast 5109

Isarplast® VP 509/51

  • Premium Primer for foils producers
Technology Documentation
Isarplast VP 50951

MS1937

  • 1K modified silane adhesive and sealant provides for superior UV and ageing resistance

NP2075VF149

  • One-component
  • High performance and high green strength reactive hot melt, allowing for high speed and low WIP manufacturing processes
  • Excellent in-process thermal stability
  • Industry leading in-lamp heat resistance performance
Technology Documentation
NP2075VF149

PD 2128

  • Hi Tack acrylic PSA suitable for a variety of application including insulation, flexible ciruits, and general bonding

PIB6510

  • Excellent waterproof barrier properties,excellent UV resistance,permanent shape

SN103W

  • De-alcohol type, low odor, non-yellowing

SN106FA

  • Medium viscosity,low elongation, excellent gear oil resistance

SN106FA

  • Good resistance to gear oil, lubrication oil and anti-freezing solution

SN107

  • High elongation, good oil resistance and bonding performance

SN595

  • Low strength, IP67,easy to operate

swift®bond 2139/1 + swift®hardener 2111

  • Two-component
  • Good shelf life stability
  • Fogging resistance of greater than 130°C
  • Excellent bond strength at greater than 120°C
  • Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
  • Fast green strength
Technology Documentation
swiftbond 21391 swifthardener 2111

swift®bond 2140 + swift®hardener 2111

  • Two-component
  • Good shelf life stability
  • Fogging resistance of greater than 130°C
  • Excellent bond strength at greater than 120°C
  • Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
  • Slow green strength
Technology Documentation
swiftbond 2140 swifthardener 2111

Swift®Bond 2846

  • Best performance 1K solvent based solution for headliners and trunk lamination
Technology Documentation
SwiftBond 2846

Swift®Bond 2U010

  • Two components Liquid Moisture curing for headliners construction
Technology Documentation
SwiftBond 2U010

Swift®Bond 3U012

  • One component Liquid Moisture curing for headliners construction
Technology Documentation
SwiftBond 3U012

Swift®bond 3U115

  • Meduim curing
  • Adhesion to all RV components
  • Extrusion grade
Technology Documentation
Swiftbond 3U115

Swift®bond 3U117

  • Fast curing
  • Adhesion to all RV components
  • Extrusion grade
Technology Documentation
Swiftbond 3U117

Swift®Col 214-X

  • Premium OEM's preferred solvent solution for manual lamination
Technology Documentation
SwiftCol 214-X

Swift®Col 2411

  • High heat resistance 1K Neoprene suitable for bonding Untreated PP
Technology Documentation
SwiftCol 2411

Swift®Col 2415

  • High heat resistance 1K Neoprene for BTR applications
Technology Documentation
SwiftCol 2415

Swift®Col 2418/1

  • High heat resistance 1K Neoprene for general purposes
Technology Documentation
SwiftCol 24181

Swift®Col 2607-XX

  • Best performance Solvent Based PU with low emissions for any lamination
Technology Documentation
SwiftCol 2607-XX

Swift®Col 4250

  • High perfomance with excellent procesability for general purpose
Technology Documentation
SwiftCol 4250

Swift®Hardener 2003

  • Regular catalyst for LMC's
Technology Documentation
SwiftHardener 2003

Swift®Hardener 2005

  • Special metalic catalyst with low emissions and high hidrolysis resistance
Technology Documentation
SwiftHardener 2005

Swift®Hardener 2541

  • High curing speed solvent hardener
Technology Documentation
SwiftHardener 2541

Swift®Hardener 2551

  • High performance and high curing speed solvent hardener
Technology Documentation
SwiftHardener 2551

Swift®Hardener 9151

  • Long pot life solvent hardener
Technology Documentation
SwiftHardener 9151

Swift®Hardener 9515

  • Long pot life solvent hardener
Technology Documentation
SwiftHardener 9515

Swift®Lock 2003

  • Untreated PP bonding specialist for Interior Trim lamination
  • Low activation temperature and high green strength
Technology Documentation
SwiftLock 2003

Swift®Lock 2028

  • High green strength with short open time
  • The original
Technology Documentation
SwiftLock 2028

Swift®Lock 2028/1

  • Low activation and high green strength
  • Specialist in Interior Laminations
Technology Documentation
SwiftLock 20281

Swift®Lock 2681

  • High performance PUR
  • The PVC specialist for Interior Trim lamination
Technology Documentation
SwiftLock 2681

Swift®Lock 2682

  • Premium/Manual lamination specialist
  • Fast curing, low activation and color changing when heat activated
Technology Documentation
SwiftLock 2682

Swift®Lock 2900

  • Hybrid HMMC able to bond Polar and Non Polars without surface pre-treatment
Technology Documentation
SwiftLock 2900

Swift®Lock 2914

  • High green strength and wide adhesive spectrum for attachments and assemby processes
Technology Documentation
SwiftLock 2914

Swift®Lock 2U464

  • Very aggressive hot tack wiht high green strength
Technology Documentation
SwiftLock 2U464

Swift®lock 2U520

  • Formualted to bond lauan to FRP
  • Reduces seam print
  • Excellent creep resitiance in summer
Technology Documentation
Swiftlock 2U520

Swift®lock 2U566

  • Formualted to bond lauan to FRP
  • Medium open time
  • Pigment blue for production visability
Technology Documentation
Swiftlock 2U566

Swift®lock 9053

  • High green strength for hard to bond FRP
  • Resists edge lift
  • Five or six layer composite wall builds
Technology Documentation
Swiftlock 9053

Swift®Lock HL 9647

  • Reactive Olefine with excellent performance for assembly UPP parts
Technology Documentation
SwiftLock HL 9647

Swift®Melt HM-1487

  • Trunk/carpet lamination PSA with good hot tack, very good shear strength, and high heat resistance
Technology Documentation
SwiftMelt HM-1487

Swift®tak 49404

  • Formulated to seal wall asssemblies
  • Paint roller application
Technology Documentation
Swifttak 49404

Swift®Tak L 52/012

  • 2K solution
  • Drying is not needed
  • Excellent performance for bonding Untreated PP
Technology Documentation
SwiftTak L 12052

Swift®Therm 2003

  • High Heat resistance APAO suitable for pre-applications
Technology Documentation
SwiftTherm 2003

Swift®Therm 2103

  • Long open time and high heat resistance APAO suitable for "on line" processes
Technology Documentation
SwiftTherm 2103

Swift®Therm 2699

  • Hybrid APAO hot melt with superb heat resistance bonding Polar and Non Polars
  • Suitable for pre-applications
Technology Documentation
SwiftTherm 2699

Swift®therm 2H740

  • Spray grade
  • Web-over application
  • Fast set and flexible
Technology Documentation
Swifttherm 2H740

Swift®Therm HL 6612

  • High performance Polyamide with short open time for making attachments
Technology Documentation
SwiftTherm HL 6612

Thermonex® 063-XX (series)

  • Market Reference
  • Gold Solution
  • Best processability with highest performance
Technology Documentation
Thermonex 063XX series

Thermonex® 080-XX (series)

  • Especialy designed solution for Flocking applications
Technology Documentation
Thermonex 080XX series

Thermonex® 115-02

  • A cost effective solution with a great performance
  • Silver Solution
Technology Documentation
Thermonex 115-02

Thermonex® 3428-XX (series)

  • Especially designed solution for Headliners lamination processes
Technology Documentation
Thermonex 3428XX series

Thermonex® 3820-XX (series)

  • The specialist for the ABS-PVC combination
  • Gold Solution
Technology Documentation
Thermonex 3820XX series

Thermonex® Hardener 004

  • Water based reliable hardener
Technology Documentation
Thermonex Hardener 004

Thermonex® Hardener 006

  • Water based reliable hardener
Technology Documentation
Thermonex Hardener 006

Thermonex® Hardener 007

  • High curing speed water based hardener
Technology Documentation
Thermonex Hardener 007

TL 0587

  • 2K PU potting material with good flexibility

TS820

  • Low odor 2K Acrylate adhesive suitable for general bonding with excellent impact resistance
  • Suitable for cell bonding within batteyr modules

TS820FR

  • Flame retardant, low odor, excellent shear and peel strength

TS820L

  • Low odor structural, excellent shear and peel strength

TS956

  • 2 Part PU suitable for bonding dis-similar materials including plastics, as ecountered in plastic liftgates and a variety of exterior trim applications

U340

  • High Speed
  • High Strength
  • Great on multiple surfaces

U345

  • High Strenth
  • Hgh flexibility
  • Good on multiple surfaces

WC2309

  • 1K Heat cure epoxy provides superior bonding of aluminum body structures

الاتصال بأحد المتخصصين

نحن مستعدون للمساعدة عندما تحتاج إلينا، في كل مرحلة من المراحل.

Find your solution: