Water Shield Adhesives and Weatherstrip Sealants

Share:

Keep water and dirt out of
the vehicle with our specially
designed adhesives and sealants

At H.B. Fuller, we create door water shield adhesives that are designed to last the life of the vehicle.  

The water shield helps prevent water and dirt from getting inside the interior of the vehicle through access panels in the doors. Water shields are typically made from polyethylene flexible plastic sheets held in place with an adhesive. The door water shield adhesive is applied around the perimeter of the water shield and seals against water intrusion between the water shield and the door shell.   

The Details

The adhesive material is designed to remain permanently flexible in all environmental conditions. It must stay adhered when a door is closed during the cold winter months, remain in place when battling the summer heat, and refrain from emitting any materials that would fog surfaces of the vehicle.

The adhesive is designed to be soft enough that the operator can easily press it into place, yet also be repositioned during assembly in case of misalignment. Door water shields are typically stacked when transported to the OEM and the adhesive will not deform during shipping.

Weatherstrip Sealants

Weatherstrips are installed around sealing surfaces like car doors, trunk lids, and sunroofs, to help keep water, wind, and dirt out of the vehicle. Our sealant keeps elements from getting under the weatherstrip in addition to helping protect the flanges they are attached to from rusting.
 
Our weatherstrip sealants are also designed to last the life of the vehicle, as they must remain permanently pliable in all environmental conditions and cannot cause staining to the painted surface. The material is designed so that it does not hinder the installation of the weatherstrip itself.
 
Talk to an H.B. Fuller expert today about your door water shield adhesive and vehicle weatherstrip sealant needs.

1280

  • 2K PU light weight foam provides for complete encapsulation of the battery cells within a module
  • This provides for excellent structural enhancements and increased impact resistance
Tecnología Documentación
1280
Used For battery module encapsulation
PU | Reactive Chemistry

1510

  • Anaerobic flange sealant - good resistance to high temperature and chemicals
  • Used for sealing rigid flanges
Tecnología Documentación
1510
Used For rigid flange sealing
Anaerobic | Anaerobic

1515

  • Anaerobic flange sealant - gneral purpose, can be used on vibriating joint surfaces
Tecnología Documentación
1515
Used For rigid flange sealing
Anaerobic | Anaerobic

1518

  • Anaerobic flange sealant - suitable for aluminum alloy surfaces
Tecnología Documentación
1518
Used For rigid flange sealing
Anaerobic | Anaerobic

1581

  • This is a single component RTV silicone suitable for sealing battery pack enclosures
Tecnología Documentación
1581
Used For battery pack main seal
Silicone | Silicone RTV

1583

  • Excellent electrical properties, weather stability and chemical resistance

1590

  • General oxime silicone RTV for flange sealing on engines
  • High eleongation and excellent chemical resistance and aging
Tecnología Documentación
1590
Used For oil pan, ladder frame gaskets
Silicone | Silicone RTV

1592

  • High remperature resistance RTV silicone sealant
Tecnología Documentación
1592
Used For high temperature sealing environoments
Silicone | Silicone RTV

1596 Fa

  • Silicone RTV for with excellent compatibility with a variety of lubricating oils and coolant
Tecnología Documentación
1596 Fa
Used For engine front cover, waterpump
Silicone | Silicone RTV

1596Fa

  • This is a single component RTV silicone suitable for general powertrain applications
  • This product has excellent resistance to gear oils, lubricating oils, and anti-freeze liquids
Tecnología Documentación
1596Fa
Used For general powertrain applications
Silicone | Silicone RTV

1598

  • Silicone RTV flange sealant with excellent resistance to oils and variois chemicals
Tecnología Documentación
1598
Used For general flange sealing
Silicone | Silicone RTV

1599

  • Silicone RTV suitable for sealing rigid joints
Tecnología Documentación
1599
Used For rigid flange sealing
Silicone | Silicone RTV

1956

  • 1K PU structural adhesive for window bonding applications
  • Available in 2 viscosities
Tecnología Documentación
1956
Used For structural window bonding
PU | PU

2061US

  • 2K fire retardent 2K PU
Tecnología Documentación
2061US
Used For general potting / encapsulation
PU | PU

2532

  • Excellent conductivity insulation, flame retardancy, high temperature resistance

5005

  • Low odor and low blooimng wicking grade
Tecnología Documentación
5005
Used For medical, automotive and general assembly
Instant Adhesives | Reactive Chemistry

5008

  • Low odor and low blooimng wicking grade
Tecnología Documentación
5008
Used For medical, automotive and general assembly
Instant Adhesives | Reactive Chemistry

7012

  • 1K Acrylate plus activator is an excellent thermally conductive battery module cell bonding adhesive
  • Long open time but immediate fixture strength
Tecnología Documentación
7012
Used For battery cell to module base bonding
Reactive Chemistry | Thermal Conductive Adhesive

AN06R

  • High strength,thixotropic viscosity, good fatigue resistance
Tecnología Documentación
AN06R

AR106

  • Thixotropic viscosity, high-strength sealant
Tecnología Documentación
AR106

AS114

  • Soft adhesive layer after curing
Tecnología Documentación
AS114

CILBOND 12E

  • High-temperature resistance primer
  • Excellent corrosion resistance and substrate protection
  • Used with CILBOND 80ET
Tecnología Documentación
CILBOND 12E
Used For high-temperature and aggressive environments
Primer | Solvent-based

CILBOND 24

  • Premier one-coat rubber-to-metal bonding agent
  • Bonds general purpose elastomers
  • Extremely versatile
Tecnología Documentación
CILBOND 24
Used For bonding general purpose elastomers: nr,sbr,ir,cr,br,eco,aem, vamac,csm, acsm, acm,xnbr,evm
One-coat rubber bonding agent | Solvent-based

CILBOND 36

  • Specialty one-coat rubber-to-metal bonding agent
  • Extreme corrosion protection
  • Long open time
Tecnología Documentación
CILBOND 36
Used For bonding specialty elastomers: silicone,fkm,fvmq,vmq,ffkm,hnbr,acm,aem
One-coat rubber bonding agent | Solvent-based

CILBOND 48

  • Low-temperature one-coat PU-to-metal bonding agent
  • Outstanding for room-temperature bonding
  • Clear in color
Tecnología Documentación
CILBOND 48
Used For bonding lowtemperature cast pu tpu and millable pu
One-coat PU bonding agent | Solvent-based

CILBOND 49SF

  • High-temperature one-coat PU-to-metal bonding agent
  • Perfect for hot-cast PU bonding
  • Red in color
Tecnología Documentación
CILBOND 49SF
Used For bonding hotcast pu tpu and millable pu
One-coat PU bonding agent | Solvent-based

CILBOND 62W

  • High-temperature resistance - 500 degree C
  • 100 percent friction material retention
  • Also bonds nitrile rubber
Tecnología Documentación
CILBOND 62W
Used For bonding brake pad media-to-back plate
One-Coat Friction Bonding Agent | Water-based

CILBOND 80ET

  • Exceptional topcoat rubber-to-metal bonding agent
  • Bonds all general purpose elastomers
  • Extremely versatile
Tecnología Documentación
CILBOND 80ET
Used For bonding all general purpose elastomers nrsbrircrbrecoaem vamaccsm acsm acmnbrhnbrxnbrevmevaepdmepmc
Rubber bonding agent topcoat | Solvent-based

CILBOND Diluent 4000

  • Acceptional Solvent Blend Designed for CILBOND Materials
  • Heavily used with CILBOND 48 and CILBOND 49SF
Tecnología Documentación
CILBOND Diluent 4000
Used For diluting cilbond 48 and cilbond 49sf
Diluent | Solvent-based

CILCURE B

  • Enhancement Aduct for CILBOND 48 and CILBOND 49SF
  • Increases bond performance
  • Improves heat resistance
  • Expands process window
Tecnología Documentación
CILCURE B
Used For enhancing heat and environmental performance of cilbond 48 and cilbond 49sf
PU bonding agent additive | Solvent-based

Cyberbond 2240

  • Rubber toughened CA provides for very fast bonding and increased impact resistance
Tecnología Documentación
Cyberbond 2240
Used For insulation bonding, general bonding
CA | Cyanoacrylate

EM-9002

  • Something different
  • A different approach to Interior trim lamination
  • A Reactive Film
Tecnología Documentación
EM-9002
Used For interior trim laminations (intrument panels, door panels, central console )
Other | Reactive PU Film

EP832

  • High strength and good toughness, heat resistance up to 150℃ in long term and 180℃ in short time,low viscosity
Tecnología Documentación
EP832

EP843

  • High strength, heat resistance can up to 150℃ in long term and 180℃ in short time,high viscosity
Tecnología Documentación
EP843

EY1514AB

  • 2k Thermally Conductive Adhesive
Tecnología Documentación
EY1514AB
Used For general potting / encapsulation
Epoxy | Epoxy

FH4003AB

  • General epoxy encapsulant
Tecnología Documentación
FH4003AB
Used For charger handle encapsulation, general potting
Epoxy | Epoxy

FH8017M

  • Underfill and edge bonding material
Tecnología Documentación
FH8017M
Used For underfill / edge bonding, battery module
Epoxy | Epoxy

Isarplast® 5109

  • Steering Wheels lamination specialist
Tecnología Documentación
Isarplast® 5109
Used For steering wheels manual lamination
Solvent Rubber | Solvent-based

Isarplast® VP 509/51

  • Premium Primer for foils producers
Tecnología Documentación
Isarplast® VP 509/51
Used For primer for flexible foils producers
Solven-based Primers | Solvent-based

MS1937

  • 1K modified silane adhesive and sealant provides for superior UV and ageing resistance
Tecnología Documentación
MS1937
Used For sealing windows and trim parts
MS | STP

NP2075VF149

  • One-component
  • High performance and high green strength reactive hot melt, allowing for high speed and low WIP manufacturing processes
  • Excellent in-process thermal stability
  • Industry leading in-lamp heat resistance performance
Tecnología Documentación
NP2075VF149
Used For headlamp lens/housing bonding
Reactive Chemistry | Reactive Hot Melt

PD 2128

  • Hi Tack acrylic PSA suitable for a variety of application including insulation, flexible ciruits, and general bonding
Tecnología Documentación
PD 2128
Used For insulation bonding, general bonding
PSA | PSA

PIB6510

  • Excellent waterproof barrier properties,excellent UV resistance,permanent shape
Tecnología Documentación
PIB6510

SN103W

  • De-alcohol type, low odor, non-yellowing
Tecnología Documentación
SN103W

SN106FA

  • Medium viscosity,low elongation, excellent gear oil resistance
Tecnología Documentación
SN106FA

SN106FA

  • Good resistance to gear oil, lubrication oil and anti-freezing solution
Tecnología Documentación
SN106FA

SN107

  • High elongation, good oil resistance and bonding performance
Tecnología Documentación
SN107

SN595

  • Low strength, IP67,easy to operate
Tecnología Documentación
SN595

swift®bond 2139/1 + swift®hardener 2111

  • Two-component
  • Good shelf life stability
  • Fogging resistance of greater than 130°C
  • Excellent bond strength at greater than 120°C
  • Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
  • Fast green strength
Tecnología Documentación
swift®bond 2139/1 + swift®hardener 2111
Used For headlamp lens/housing bonding
PU | Reactive Chemistry

swift®bond 2140 + swift®hardener 2111

  • Two-component
  • Good shelf life stability
  • Fogging resistance of greater than 130°C
  • Excellent bond strength at greater than 120°C
  • Excellent in-lamp durability; designed to exhibit cohesive failure during after all exposure conditions
  • Slow green strength
Tecnología Documentación
swift®bond 2140 + swift®hardener 2111
Used For headlamp lens/housing bonding
PU | Reactive Chemistry

Swift®Bond 2846

  • Best performance 1K solvent based solution for headliners and trunk lamination
Tecnología Documentación
Swift®Bond 2846
Used For headliners and trunk lamination
PU | Reactive Chemistry

Swift®Bond 2U010

  • Two components Liquid Moisture curing for headliners construction
Tecnología Documentación
SwiftBond 2U010

Swift®Bond 3U012

  • One component Liquid Moisture curing for headliners construction
Tecnología Documentación
SwiftBond 3U012

Swift®bond 3U115

  • Meduim curing
  • Adhesion to all RV components
  • Extrusion grade
Tecnología Documentación
Swift®bond 3U115
Used For recreational vehicle - sidewall lamination
LMC (Liquid Moisture Cure) | Reactive Chemistry

Swift®bond 3U117

  • Fast curing
  • Adhesion to all RV components
  • Extrusion grade
Tecnología Documentación
Swift®bond 3U117
Used For recreational vehicle - sidewall lamination
LMC (Liquid Moisture Cure) | Reactive Chemistry

Swift®Col 214-X

  • Premium OEM's preferred solvent solution for manual lamination
Tecnología Documentación
Swift®Col 214-X
Used For interior trim laminations (intrument panels, door panels, central console )
2K PU | Solvent-based

Swift®Col 2411

  • High heat resistance 1K Neoprene suitable for bonding Untreated PP
Tecnología Documentación
Swift®Col 2411
Used For interior trim general laminations
Solvent Rubber | Solvent-based

Swift®Col 2415

  • High heat resistance 1K Neoprene for BTR applications
Tecnología Documentación
Swift®Col 2415
Used For floors flat lamination for buses and trains
Solvent Rubber | Solvent-based

Swift®Col 2418/1

  • High heat resistance 1K Neoprene for general purposes
Tecnología Documentación
Swift®Col 2418/1
Used For interior trim general laminations
Solvent Rubber | Solvent-based

Swift®Col 2607-XX

  • Best performance Solvent Based PU with low emissions for any lamination
Tecnología Documentación
Swift®Col 2607-XX
Used For interior trim laminations (intrument panels, door panels, central console )
2K PU | Solvent-based

Swift®Col 4250

  • High perfomance with excellent procesability for general purpose
Tecnología Documentación
Swift®Col 4250
Used For soft parts laminations and foam repairments
PSA | Solvent-based

Swift®Hardener 2003

  • Regular catalyst for LMC's
Tecnología Documentación
Swift®Hardener 2003
Used For catalyst for swift®bond solutions
Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 2005

  • Special metalic catalyst with low emissions and high hidrolysis resistance
Tecnología Documentación
Swift®Hardener 2005
Used For catalyst for swift®bond solutions
Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 2541

  • High curing speed solvent hardener
Tecnología Documentación
Swift®Hardener 2541
Used For hardener for any swift®col solutions
Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 2551

  • High performance and high curing speed solvent hardener
Tecnología Documentación
Swift®Hardener 2551
Used For hardener for any swift®col solutions
Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 9151

  • Long pot life solvent hardener
Tecnología Documentación
Swift®Hardener 9151
Used For hardener for any swift®col solutions
Catalyst & Thickeners | Reactive Chemistry

Swift®Hardener 9515

  • Long pot life solvent hardener
Tecnología Documentación
Swift®Hardener 9515
Used For hardener for any swift®col solutions
Catalyst & Thickeners | Reactive Chemistry

Swift®Lock 2003

  • Untreated PP bonding specialist for Interior Trim lamination
  • Low activation temperature and high green strength
Tecnología Documentación
Swift®Lock 2003
Used For interior trim laminations (intrument panels, door panels, central console )
Hot Melt | Reactive Hot Melt

Swift®Lock 2028

  • High green strength with short open time
  • The original
Tecnología Documentación
Swift®Lock 2028
Used For interior trim laminations (intrument panels, door panels, central console )
Hot Melt | Reactive Hot Melt

Swift®Lock 2028/1

  • Low activation and high green strength
  • Specialist in Interior Laminations
Tecnología Documentación
Swift®Lock 2028/1
Used For interior trim laminations (intrument panels, door panels, central console )
Hot Melt | Reactive Hot Melt

Swift®Lock 2681

  • High performance PUR
  • The PVC specialist for Interior Trim lamination
Tecnología Documentación
Swift®Lock 2681
Used For interior trim laminations (intrument panels, door panels, central console )
Hot Melt | Reactive Hot Melt

Swift®Lock 2682

  • Premium/Manual lamination specialist
  • Fast curing, low activation and color changing when heat activated
Tecnología Documentación
Swift®Lock 2682
Used For interior trim laminations (intrument panels, door panels, central console )
Hot Melt | Reactive Hot Melt

Swift®Lock 2900

  • Hybrid HMMC able to bond Polar and Non Polars without surface pre-treatment
Tecnología Documentación
Swift®Lock 2900
Used For interior trim laminations (intrument panels, door panels, central console )
Hot Melt | Reactive Hot Melt

Swift®Lock 2914

  • High green strength and wide adhesive spectrum for attachments and assemby processes
Tecnología Documentación
Swift®Lock 2914
Used For attachment and assembly reactive polyurethane
Hot Melt | Reactive Hot Melt

Swift®Lock 2U464

  • Very aggressive hot tack wiht high green strength
Tecnología Documentación
Swift®Lock 2U464
Used For interior trim laminations (intrument panels, door panels, central console )
Hot Melt | Reactive Hot Melt

Swift®lock 2U520

  • Formualted to bond lauan to FRP
  • Reduces seam print
  • Excellent creep resitiance in summer
Tecnología Documentación
Swift®lock 2U520
Used For recreational vehicle - sidewall lamination
Reactive Chemistry | Reactive Hot Melt

Swift®lock 2U566

  • Formualted to bond lauan to FRP
  • Medium open time
  • Pigment blue for production visability
Tecnología Documentación
Swift®lock 2U566
Used For recreational vehicle - sidewall lamination
Reactive Chemistry | Reactive Hot Melt

Swift®lock 9053

  • High green strength for hard to bond FRP
  • Resists edge lift
  • Five or six layer composite wall builds
Tecnología Documentación
Swift®lock 9053
Used For recreational vehicle - sidewall lamination
Reactive Chemistry | Reactive Hot Melt

Swift®Lock HL 9647

  • Reactive Olefine with excellent performance for assembly UPP parts
Tecnología Documentación
Swift®Lock HL 9647
Used For attachment and assembly reactive olefine
Hot Melt | Reactive Hot Melt

Swift®Melt HM-1487

  • Trunk/carpet lamination PSA with good hot tack, very good shear strength, and high heat resistance
Tecnología Documentación
Swift®Melt HM-1487
Used For trunk, carpets and nvh parts lamination
Hot Melt | PSA

Swift®tak 49404

  • Formulated to seal wall asssemblies
  • Paint roller application
Tecnología Documentación
Swift®tak 49404
Used For recreational vehicle - composite wall edge seal
Water-based | Water-based

Swift®Tak L 52/012

  • 2K solution
  • Drying is not needed
  • Excellent performance for bonding Untreated PP
Tecnología Documentación
Swift®Tak L 52/012
Used For trunk lamination
PSA | Water-based

Swift®Therm 2003

  • High Heat resistance APAO suitable for pre-applications
Tecnología Documentación
Swift®Therm 2003
Used For trunk lamination and attachments and assembly processes
Hot Melt | Thermoplastic

Swift®Therm 2103

  • Long open time and high heat resistance APAO suitable for "on line" processes
Tecnología Documentación
Swift®Therm 2103
Used For ) and trunk lamination interior trim laminations (door panels, central console
Hot Melt | Thermoplastic

Swift®Therm 2699

  • Hybrid APAO hot melt with superb heat resistance bonding Polar and Non Polars
  • Suitable for pre-applications
Tecnología Documentación
Swift®Therm 2699
Used For ) and trunk lamination interior trim laminations (door panels, central console
Hot Melt | Thermoplastic

Swift®therm 2H740

  • Spray grade
  • Web-over application
  • Fast set and flexible
Tecnología Documentación
Swift®therm 2H740
Used For recreational vehicle - assembly backer
Hot Melt

Swift®Therm HL 6612

  • High performance Polyamide with short open time for making attachments
Tecnología Documentación
Swift®Therm HL 6612
Used For attachment and assembly polyamide
Hot Melt | Thermoplastic

Thermonex® 063-XX (series)

  • Market Reference
  • Gold Solution
  • Best processability with highest performance
Tecnología Documentación
Thermonex® 063-XX (series)
Used For interior trim laminations (intrument panels, door panels, central console )
Polyurethane Dispersions | Water-based

Thermonex® 080-XX (series)

  • Especialy designed solution for Flocking applications
Tecnología Documentación
Thermonex® 080-XX (series)
Used For flocking applications
Polyurethane Dispersions | Water-based

Thermonex® 115-02

  • A cost effective solution with a great performance
  • Silver Solution
Tecnología Documentación
Thermonex® 115-02
Used For interior trim laminations (intrument panels, door panels, central console )
Polyurethane Dispersions | Water-based

Thermonex® 3428-XX (series)

  • Especially designed solution for Headliners lamination processes
Tecnología Documentación
Thermonex® 3428-XX (series)
Used For interior trim lamination of headliners
Polyurethane Dispersions | Water-based

Thermonex® 3820-XX (series)

  • The specialist for the ABS-PVC combination
  • Gold Solution
Tecnología Documentación
Thermonex® 3820-XX (series)
Used For interior trim laminations (intrument panels, door panels, central console )
Polyurethane Dispersions | Water-based

Thermonex® Hardener 004

  • Water based reliable hardener
Tecnología Documentación
Thermonex® Hardener 004
Used For hardener for any thermonex® solutions
Catalyst & Thickeners | Reactive Chemistry

Thermonex® Hardener 006

  • Water based reliable hardener
Tecnología Documentación
Thermonex® Hardener 006
Used For hardener for any thermonex® solutions
Catalyst & Thickeners | Reactive Chemistry

Thermonex® Hardener 007

  • High curing speed water based hardener
Tecnología Documentación
Thermonex® Hardener 007
Used For hardener for any thermonex® solutions
Catalyst & Thickeners | Reactive Chemistry

TL 0587

  • 2K PU potting material with good flexibility
Tecnología Documentación
TL 0587
Used For general potting / encapsulation
PU | PU

TS820

  • Low odor 2K Acrylate adhesive suitable for general bonding with excellent impact resistance
  • Suitable for cell bonding within batteyr modules
Tecnología Documentación
TS820
Used For general bonding, battery cell to module base
MMA | Reactive Chemistry

TS820FR

  • Flame retardant, low odor, excellent shear and peel strength
Tecnología Documentación
TS820FR

TS820L

  • Low odor structural, excellent shear and peel strength
Tecnología Documentación
TS820L

TS956

  • 2 Part PU suitable for bonding dis-similar materials including plastics, as ecountered in plastic liftgates and a variety of exterior trim applications
Tecnología Documentación
TS956
Used For structural bonding of dis similar materials
PU | PU

U340

  • High Speed
  • High Strength
  • Great on multiple surfaces
Tecnología Documentación
U340
Used For automotive, electronics and general assembly
Reactive Chemistry | UV Cure Structurals

U345

  • High Strenth
  • Hgh flexibility
  • Good on multiple surfaces
Tecnología Documentación
U345
Used For automotive, electronics and general assembly
Reactive Chemistry | UV Cure Structurals

WC2309

  • 1K Heat cure epoxy provides superior bonding of aluminum body structures
Tecnología Documentación
WC2309
Used For structural bonding of aluminum
Epoxy | Epoxy

Póngase en contacto con un especialista

Estamos aquí cuando nos necesitan, en cada paso del camino.

Encuentre su solución: