Share:
Electric car parked in a driveway representing industrial adhesives for electric vehicles from H.B. Fuller.

As electric vehicle (EV) technology evolves to become more practical and cost-effective, manufacturing EVs will require a well-tooled supply chain with cutting-edge electric vehicle adhesive and sealant solutions. That means EV manufacturers won’t just need solutions that are proven to work — they’ll need a solution partner willing to innovate and break through boundaries. At H.B. Fuller, we thrive on solving challenges. Just bring your electric vehicle adhesive challenge to us, and we’ll handle the rest.

Our solutions include: 
Thermally-Conductive Encapsulants
Battery design requires the management and dissipation of heat. Our thermally-conductive materials facilitate the efficient transmission of heat away from critical circuits and connection points.

Structural Adhesives 
Advancing the EV market means designing them to be lightweight. Our structural adhesive offerings are made to address the increased use of aluminum, composites, and other lightweight materials.

Silicone Sealants
Preventing the elements of a harsh road environment from getting into EV batteries and interfaces is critical. Our state-of-the-art brand of electric vehicle silicone sealants can stand up to salt, oil, UV rays, and a wide range of temperatures.
Cure-in-Place Gaskets
Our cure-in-place gaskets are dispensed on one half of an enclosure, then cured before installation. This effectively seals a part, while leaving it accessible to removal and reuse in the service environment, aiding in the long-term serviceability of the vehicle.
Epoxies
Our complete portfolio of epoxies are well suited for a variety of EV challenges that include battery construction. 




1280

  • 2K PU light weight foam provides for complete encapsulation of the battery cells within a module
  • This provides for excellent structural enhancements and increased impact resistance
Technology Documentation
1280
Used for battery module encapsulation
PU | Reactive Chemistry

1581

  • This is a single component RTV silicone suitable for sealing battery pack enclosures
Technology Documentation
1581
Used for battery pack main seal
Silicone | Silicone RTV

1583

  • Excellent electrical properties, weather stability and chemical resistance
Technology Documentation
1583
Used for suitable for power battery pack sealing
Silicones | Silicones

1596Fa

  • This is a single component RTV silicone suitable for general powertrain applications
  • This product has excellent resistance to gear oils, lubricating oils, and anti-freeze liquids
Technology Documentation
1596Fa
Used for general powertrain applications
Silicone | Silicone RTV

1956

  • 1K PU structural adhesive for window bonding applications
  • Available in 2 viscosities
Technology Documentation
1956
Used for structural window bonding
PU | PU

2061US

  • 2K fire retardent 2K PU
Technology Documentation
2061US
Used for general potting / encapsulation
PU | PU

2532

  • Excellent conductivity insulation, flame retardancy, high temperature resistance
Technology Documentation
2532
Used for suitable for heat conduction potting of power battery module
Silicones | Silicones

7012

  • 1K Acrylate plus activator is an excellent thermally conductive battery module cell bonding adhesive
  • Long open time but immediate fixture strength
Technology Documentation
7012
Used for battery cell to module base bonding
Reactive Chemistry | Thermal Conductive Adhesive

Cyberbond 2240

  • Rubber toughened CA provides for very fast bonding and increased impact resistance
Technology Documentation
Cyberbond 2240
Used for insulation bonding, general bonding
CA | Cyanoacrylate

EP832

  • High strength and good toughness, heat resistance up to 150℃ in long term and 180℃ in short time,low viscosity
Technology Documentation
EP832
Used for suitable for potting bonding and have a good bonding performance to metal, stone, wood, ceramic and most of plastics
Epoxy | Epoxy

EP843

  • High strength, heat resistance can up to 150℃ in long term and 180℃ in short time,high viscosity
Technology Documentation
EP843
Used for suitable for mental and other parts bonding in high temperature and harsh conditions suitable for potting bonding, thixotropic, not flow on vertical surface
Epoxy | Epoxy

EY1514AB

  • 2k Thermally Conductive Adhesive
Technology Documentation
EY1514AB
Used for general potting / encapsulation
Epoxy | Epoxy

FH4003AB

  • General epoxy encapsulant
Technology Documentation
FH4003AB
Used for charger handle encapsulation, general potting
Epoxy | Epoxy

FH8017M

  • Underfill and edge bonding material
Technology Documentation
FH8017M
Used for underfill / edge bonding, battery module
Epoxy | Epoxy

MS1937

  • 1K modified silane adhesive and sealant provides for superior UV and ageing resistance
Technology Documentation
MS1937
Used for sealing windows and trim parts
MS | STP

PD 2128

  • Hi Tack acrylic PSA suitable for a variety of application including insulation, flexible ciruits, and general bonding
Technology Documentation
PD 2128
Used for insulation bonding, general bonding
PSA | PSA

PIB6510

  • Excellent waterproof barrier properties,excellent UV resistance,permanent shape
Technology Documentation
PIB6510
Used for suitable for power battery pack sealing
Other | Other

SN103W

  • De-alcohol type, low odor, non-yellowing
Technology Documentation
SN103W
Used for suitable for sealing and bonding electronic and electrical equipments
Silicones | Silicones

SN106FA

  • Medium viscosity,low elongation, excellent gear oil resistance
Technology Documentation
SN106FA
Used for apply to rigid joint surface sealing of transmission and timing chain cover
Silicones | Silicones

SN595

  • Low strength, IP67,easy to operate
Technology Documentation
SN595
Used for suitable for power battery pack sealing
Silicones | Silicones

TL 0587

  • 2K PU potting material with good flexibility
Technology Documentation
TL 0587
Used for general potting / encapsulation
PU | PU

TS820

  • Low odor 2K Acrylate adhesive suitable for general bonding with excellent impact resistance
  • Suitable for cell bonding within batteyr modules
Technology Documentation
TS820
Used for general bonding, battery cell to module base
MMA | Reactive Chemistry

TS820FR

  • Flame retardant, low odor, excellent shear and peel strength
Technology Documentation
TS820FR
Used for suitable for metals and ceramics bonding quickly with minimal surface preparation
Anaerobic | Anaerobic

TS820L

  • Low odor structural, excellent shear and peel strength
Technology Documentation
TS820L
Used for suitable for metals and ceramics bonding quickly with minimal surface preparation
Anaerobic | Anaerobic

TS956

  • 2 Part PU suitable for bonding dis-similar materials including plastics, as ecountered in plastic liftgates and a variety of exterior trim applications
Technology Documentation
TS956
Used for structural bonding of dis similar materials
PU | PU

WC2309

  • 1K Heat cure epoxy provides superior bonding of aluminum body structures
Technology Documentation
WC2309
Used for structural bonding of aluminum
Epoxy | Epoxy

Contact a Specialist

We're here when you need us, every step of the way.

H.B. Fuller - Connecting what matters.

Find your solution: