Our solutions include:
Thermally-Conductive Encapsulants
Battery design requires the management and dissipation of heat. Our thermally-conductive materials facilitate the efficient transmission of heat away from critical circuits and connection points.
Structural Adhesives
Advancing the EV market means designing them to be lightweight. Our structural adhesive offerings are made to address the increased use of aluminum, composites, and other lightweight materials.
Silicone Sealants
Preventing the elements of a harsh road environment from getting into EV batteries and interfaces is critical. Our state-of-the-art brand of electric vehicle silicone sealants can stand up to salt, oil, UV rays, and a wide range of temperatures.
Cure-in-Place Gaskets
Our cure-in-place gaskets are dispensed on one half of an enclosure, then cured before installation. This effectively seals a part, while leaving it accessible to removal and reuse in the service environment, aiding in the long-term serviceability of the vehicle.
Epoxies
Our complete portfolio of epoxies are well suited for a variety of EV challenges that include battery construction.
Our Featured Electric Vehicles Products
1280
- 2K PU light weight foam provides for complete encapsulation of the battery cells within a module
- This provides for excellent structural enhancements and increased impact resistance
Technology | Documentation | |
---|---|---|
1280Used for battery module encapsulation |
TechnologyPU | Reactive Chemistry |
1581
- This is a single component RTV silicone suitable for sealing battery pack enclosures
Technology | Documentation | |
---|---|---|
1581Used for battery pack main seal |
TechnologySilicone | Silicone RTV |
1583
- Excellent electrical properties, weather stability and chemical resistance
Technology | Documentation | |
---|---|---|
1583Used for suitable for power battery pack sealing |
TechnologySilicones | Silicones |
1596Fa
- This is a single component RTV silicone suitable for general powertrain applications
- This product has excellent resistance to gear oils, lubricating oils, and anti-freeze liquids
Technology | Documentation | |
---|---|---|
1596FaUsed for general powertrain applications |
TechnologySilicone | Silicone RTV |
1956
- 1K PU structural adhesive for window bonding applications
- Available in 2 viscosities
Technology | Documentation | |
---|---|---|
1956Used for structural window bonding |
TechnologyPU | PU |
2061US
- 2K fire retardent 2K PU
Technology | Documentation | |
---|---|---|
2061USUsed for general potting / encapsulation |
TechnologyPU | PU |
2532
- Excellent conductivity insulation, flame retardancy, high temperature resistance
Technology | Documentation | |
---|---|---|
2532Used for suitable for heat conduction potting of power battery module |
TechnologySilicones | Silicones |
7012
- 1K Acrylate plus activator is an excellent thermally conductive battery module cell bonding adhesive
- Long open time but immediate fixture strength
Technology | Documentation | |
---|---|---|
7012Used for battery cell to module base bonding |
TechnologyReactive Chemistry | Thermal Conductive Adhesive |
Cyberbond 2240
- Rubber toughened CA provides for very fast bonding and increased impact resistance
Technology | Documentation | |
---|---|---|
Cyberbond 2240Used for insulation bonding, general bonding |
TechnologyCA | Cyanoacrylate |
EP832
- High strength and good toughness, heat resistance up to 150℃ in long term and 180℃ in short time,low viscosity
Technology | Documentation | |
---|---|---|
EP832Used for suitable for potting bonding and have a good bonding performance to metal, stone, wood, ceramic and most of plastics |
TechnologyEpoxy | Epoxy |
EP843
- High strength, heat resistance can up to 150℃ in long term and 180℃ in short time,high viscosity
Technology | Documentation | |
---|---|---|
EP843Used for suitable for mental and other parts bonding in high temperature and harsh conditions suitable for potting bonding, thixotropic, not flow on vertical surface |
TechnologyEpoxy | Epoxy |
EY1514AB
- 2k Thermally Conductive Adhesive
Technology | Documentation | |
---|---|---|
EY1514ABUsed for general potting / encapsulation |
TechnologyEpoxy | Epoxy |
FH4003AB
- General epoxy encapsulant
Technology | Documentation | |
---|---|---|
FH4003ABUsed for charger handle encapsulation, general potting |
TechnologyEpoxy | Epoxy |
FH8017M
- Underfill and edge bonding material
Technology | Documentation | |
---|---|---|
FH8017MUsed for underfill / edge bonding, battery module |
TechnologyEpoxy | Epoxy |
MS1937
- 1K modified silane adhesive and sealant provides for superior UV and ageing resistance
Technology | Documentation | |
---|---|---|
MS1937Used for sealing windows and trim parts |
TechnologyMS | STP |
PD 2128
- Hi Tack acrylic PSA suitable for a variety of application including insulation, flexible ciruits, and general bonding
Technology | Documentation | |
---|---|---|
PD 2128Used for insulation bonding, general bonding |
TechnologyPSA | PSA |
PIB6510
- Excellent waterproof barrier properties,excellent UV resistance,permanent shape
Technology | Documentation | |
---|---|---|
PIB6510Used for suitable for power battery pack sealing |
TechnologyOther | Other |
SN103W
- De-alcohol type, low odor, non-yellowing
Technology | Documentation | |
---|---|---|
SN103WUsed for suitable for sealing and bonding electronic and electrical equipments |
TechnologySilicones | Silicones |
SN106FA
- Medium viscosity,low elongation, excellent gear oil resistance
Technology | Documentation | |
---|---|---|
SN106FAUsed for apply to rigid joint surface sealing of transmission and timing chain cover |
TechnologySilicones | Silicones |
SN595
- Low strength, IP67,easy to operate
Technology | Documentation | |
---|---|---|
SN595Used for suitable for power battery pack sealing |
TechnologySilicones | Silicones |
TL 0587
- 2K PU potting material with good flexibility
Technology | Documentation | |
---|---|---|
TL 0587Used for general potting / encapsulation |
TechnologyPU | PU |
TS820
- Low odor 2K Acrylate adhesive suitable for general bonding with excellent impact resistance
- Suitable for cell bonding within batteyr modules
Technology | Documentation | |
---|---|---|
TS820Used for general bonding, battery cell to module base |
TechnologyMMA | Reactive Chemistry |
TS820FR
- Flame retardant, low odor, excellent shear and peel strength
Technology | Documentation | |
---|---|---|
TS820FRUsed for suitable for metals and ceramics bonding quickly with minimal surface preparation |
TechnologyAnaerobic | Anaerobic |
TS820L
- Low odor structural, excellent shear and peel strength
Technology | Documentation | |
---|---|---|
TS820LUsed for suitable for metals and ceramics bonding quickly with minimal surface preparation |
TechnologyAnaerobic | Anaerobic |
TS956
- 2 Part PU suitable for bonding dis-similar materials including plastics, as ecountered in plastic liftgates and a variety of exterior trim applications
Technology | Documentation | |
---|---|---|
TS956Used for structural bonding of dis similar materials |
TechnologyPU | PU |
WC2309
- 1K Heat cure epoxy provides superior bonding of aluminum body structures
Technology | Documentation | |
---|---|---|
WC2309Used for structural bonding of aluminum |
TechnologyEpoxy | Epoxy |
Contact a Specialist
We're here when you need us, every step of the way.