Woman in a grocery store looking at a folding carton.
Advance your processes and products with our versatile portfolio of water-based, synthetic emulsion adhesives that provide high tack, fast setting bonds to help to optimize your folding carton adhesive applications. Our innovative Swift®tak portfolio of synthetic emulsion adhesives deliver securely bonded substrates at all speeds to ensure bond integrity off the line, contributing to your zero defect production objectives.

 Our folding carton adhesives are for:

  • Non-contact extrusion
  • Wheel
  • Windowing
  •  Film lamination to paperboard

DM 20000

  • Low stain
  • Low tack for ultra low peel
Technology Documentation
DM 20000
Used for removable/tipping pressure sensitive adhesive for direct mail pieces
Other

EG 3311

  • Very good balance of machining, initial tack, and fiber tear
  • Great fiber tear on polystyrene and PLAs
  • Can combo as a rotary back gum
Technology Documentation
EG 3311
Used for window patch gums

GP45 Plus

  • Clean machining
  • No cooking
  • Faster drying
Technology Documentation
GP45 Plus
Used for bottom paste-in house-made and paper to paper substrates
Other

HL 0008

  • Good heat resistance
  • High bond strength
  • Fast setting
Technology Documentation
HL 0008
Used for pinch and paper to paper substrates
Hot Melt

HL 2053

  • Multi-purpose adhesive excellent for corrugated applications
  • Laser printable
  • Good release from silicone release liner
Technology Documentation
HL 2053
Used for permanent label and pressure sensitive
Hot Melt

HL 2268

  • Light adhesion
  • Low staining properties
  • Excellent for paper labeling
Technology Documentation
HL 2268
Used for removable and chill label hot melt pressure sensitive
Hot Melt

HL 2711 DR

  • Very high tack for tight skin adhesion EKG and other dermal pads NAMSA approved
Technology Documentation
HL 2711 DR
Used for pressure sensitive adesive for medical usage
Hot Melt

HL 2900

  • Wide temperature range adhesive
  • Does not prematurely activate monochromatic inks/void message
Technology Documentation
HL 2900
Used for permanent speciality hot melt pressure sensitive
Hot Melt

HL 3163

  • High heat resistance
  • Versatile workhorse
  • Works well for 2-up production
Technology Documentation
HL 3163
Used for some coated spine glue soft cover catalogs with paperstock of groundwood to 60# offset
Other

HL 8255

  • Adhesion to difficult to bond substrates
  • Best for woven polypropylene
Technology Documentation
HL 8255
Used for seams on woven polypropylene substrate
Hot Melt

PA 1150 EN 001

  • Designed for excellent layflat while minimizing wrinkles and blisters, Very slow set
Technology Documentation
PA 1150 EN 001
Used for lay-flat lamination
Other

PA 1150 EN 001

  • Designed for excellent layflat while minimizing wrinkles and blisters
  • Very slow set
Technology Documentation
PA 1150 EN 001
Used for lay-flat lamination
Other

PWE 2334

  • High mileage
  • Excellent Adhesion and gloss
  • Clean machiningHighest remoistening tack in industry
Technology Documentation
PWE 2334
Used for front seal gum

Swift® tak 48668

  • Excellent machining
  • No throwing
  • Can be used on Mitsubishi Evol
Technology Documentation
Swift® tak 48668
Used for corrugated glued lap gartech wheel
Other

Swift® tak 5921

  • Suited for all line speeds
  • Clean machining with clean cut off to reduce tailing
Technology Documentation
Swift® tak 5921
Used for corrugated glued lap non-contact extrusion
Other

Swift® tak 5968

  • Increased open time
  • Better bonding/machining
  • Suited for higher speed windowing equipment
Technology Documentation
Swift® tak 5968
Used for vae adhesive used for windowing, coated paper and polylaminated board
Other

Swift®tak 17003 – 9P

  • Good wet tack
  • Faster setting
  • Faster running
  • Reduction in dog ears
Technology Documentation
Swift®tak 17003 – 9P
Used for pvac adhesive for lightweight core manufacturing in composite can/corewinding
Other

Swift®tak 5049

  • Bonds recycled and coated paper stock
  • High speed
  • High wet tack
  • Clean machining
Technology Documentation
Swift®tak 5049
Used for pvac adhesive for honeycomb panel lamination
Other

Swift®tak 5625

  • Good wet tack
  • Medium open time
  • Good water resistance
Technology Documentation
Swift®tak 5625
Used for applications where good water resistance of the final bond is required
Water-based

Swift®tak 5921

  • Fast set allows use on fast lines
  • Good adhesion to preprinted grades
  • Clean machining
Technology Documentation
Swift®tak 5921
Used for vae adhesive used for non-contact extrusion
Other

Swift®tak 5998

  • Excellent bonding
  • Faster set speed
  • Better wet tack
  • Clean machining
Technology Documentation
Swift®tak 5998
Used for lamination with coated paper, treated films, poly laminated board
Other

Swift®therm 8078

  • Good penetration on variety of body and cover stock
  • Flexible with excellent cold crack
Technology Documentation
Swift®therm 8078
Used for spine glue catalog magazines with heavy ink varnish paperstock
Other

TT 1013

  • Clean machining
  • Very little stringing
Technology Documentation
TT 1013
Used for tissue and towel cold transfer glues

TT 3005 HS HBF TT 3005 HS UV

  • Superior bonding on all papers including TAD
  • Clean running
  • Can dilute to 4-5% for toweling, 2
  • 5-3
  • 0% for tissue
  • Excellent Total Cost of Ownership
  • TT 3005 HS UV has UV indicator for troubleshooting
Technology Documentation
TT 3005 HS HBF TT 3005 HS UV
Used for towel ply lamination

TT 4903

  • Self-cleaning properties
  • Excellent dry release
  • When improved penetration is needed
Technology Documentation
TT 4903
Used for tissue tail tie - cellulose

V 3869 UN 001

  • Fast setting
  • Superior wet tack
  • Clean machining For kraft paper and wide variety of carton stock
Technology Documentation
V 3869 UN 001
Used for vae adhesive used for wheel
Other

WB 2338 MXRB 001

  • Good fiber tear
  • Works well on high and medium speed lines
  • Lead product for Rotary machines
  • Best for high speed machines
Technology Documentation
WB 2338 MXRB 001
Used for rotary back-gum (side seam)
Water-based

WB 3400 DPN

  • Designed for expected peel and seal performance
  • High solids
Technology Documentation
WB 3400 DPN
Used for pressure sensitive adhesive for self-seal front gum
Water-based

WB 4948 MLN

  • High wet tack
  • Clean machining
Technology Documentation
WB 4948 MLN
Used for tissue tail tie - cellulose

WB 8610 001

  • Clean machining
  • Minimal tailing and build up
  • Can be used for combo gum for patch and back gum applications
Technology Documentation
WB 8610 001
Used for extrusion back-gum (side seam)
Water-based

WB 8928

  • High performance with high adhesion to difficult cover materials
Technology Documentation
WB 8928
Used for case-in-pastes
Water-based

WD 3450 C 001

  • Runs well in gravure applications on treated films
Technology Documentation
WD 3450 C 001
Used for vae adhesive used for film laminating to paperboard
Other

Contact a Specialist

We're here when you need us, every step of the way.

H.B. Fuller - Connecting what matters.

Find your solution: